Avoid error prone
manual recording and keyboard entry of readings.
The MMUX4 Multiplexer provides the capacity for direct input of Mitutoyo
gauge readings to any computer with an RS 232
port.
Featuring
- Direct PC input from Mitutoyo gauges.
- One single switch action initiates an auto read
function on a pre-set group of gauges.
- Remote Gauge selection and data requests via serial
commands.
- Footswitch input for initiating data
transfers.
- Interconnect up to eight MMUX4 units together using
standard CAT5 patchcords
allows the possible connection of 32 gauges over 30m. back to one PC
|
POWER: |
8 – 15VDC
@100mA (Plugpack included) |
|
SIZE: |
WxDxH: 195x110x55mm |
|
OUTPUT: |
RS232C: DTE
Equipment Baud Rate: 300 – 19.2K (1200
Default) |
|
SERIAL
PARAMETERS: |
Data: 8 Bits, 1 Stop
Bit, No Parity |
|
CONNECTOR: |
DB25 Female
Connector (Cable to PC
included) |
|
OUTPUT FORMAT
EXAMPLE: (CHANNEL
1) |
01A+00012.15 [cr] |